fuseholders fpg www.schurter.com/pg0 2 fuses shock-safe fuseholder, 5 x 20 mm, slot/fingergrip, ip 40 / ip 67, iec 60335-1 fingergrip 250 vac 2.5 w / 10 a (vde)16 a (ul/csa) description - meets the new requirements of iec 60335-1 ed. 4.0 for appliances in unattended use (clause 30.2.3). this includes the enhanced require - ments of glow wire tests acc. to iec 60695-2-11 to -13. order numb - ers: xxxx.xxxx.15 standards - iec 60127-6 - ul 4248-1 / ul 512 - csa c22.2 no. 39 approvals - vde license number: 127216 - ul file number: e39328 applications - industrial electronic - household appliances - medical equipments references general product informatio n weblinks approval s , roh s , china-roh s , e-stor e , distributor-stock-chec k , accessorie s , product change notification (pcn ) technical data shocksafe category pc2 fuse-link 5 x 20 mm mounting panel mount, front-side mounting fixing nut terminal solder or quick-connect 4.8 x 0.5 mm rated voltage 250 vac rated current 10 a (vde), 16 a (ul/csa) rated power acceptance iec 2.5 w / 10 a @ ta 23 c admissible power acceptance at hig - her ambient temperature see derating curves degree of protection ip 40 / ip 67 protection class suitable for appliances with protection class 1 or 2 acc. to iec 61140 admissible ambient air temp. -40 c to 85 c climatic category 40/085/21 acc. to iec 60068-1 material: socket thermoplastic, black, ul 94v-0 material: terminals tin-plated copper alloy unit weight (socket/cap) 5.7 g storage conditions 0 c to 60 c, max. 70% r.h. product marking , type, voltage, power acc./current rating, approvals soldering methods iron solderability 350 c / 2 sec acc. to iec 60068-2-20, test ta, method 2 resistance to soldering heat 350 c / 10 sec acc. to iec 60068-2-20, test tb, method 2 contact resistance < 5 m at 20 mv dielectric strength > 3 kv between l-n > 4 kv between l/n-pe (50 hz; 1 min) impulse withstand voltage > 2.5 kv between l-n > 6 kv between l/n-pe insulation resistance > 10 m between l-n > 100 m between l/n-pe (500 vdc; 1 min) overvoltage category i - ii acc. to iec 60664-1 pollution degree 1 - 3 acc. to iec 60664-1 resistance to vibration acc. to iec 60068-2-6, test fc admissible torque on fixing nut max 1.2 nm panel thickness s max 6 mm
2 fuseholders fpg www.schurter.com/pg0 2 fuses abmessungen 41.5 mm 6 6 26.5 7 8 5 1 ? 1 . 6 1 ? 1 . 1 1 ? 2 6 . 7 41.5 m12.7x1.5 sw14 8 . 1 variants 3101.0010 and 3101.0210 6 6 26.5 7 8 ? 15 ? 16.1 ? 11.1 7.62 41.5 m12.7x1.5 sw14 1.8 4 ? 12.5 12 46.5 variants fingergrip 3101.0015 and 3101.0215 6 6 25.9 7.6 8 5 1 ? 1 . 6 1 ? 1 . 1 1 ? 2 6 . 7 41.5 m12.7x1.5 sw14 8 . 1 variants 3101.0110 and 3101.0310 6 6 25.9 7.6 8 ? 15 ? 16.1 ? 11.1 7.62 41.5 m12.7x1.5 sw14 1.8 4 ? 12.5 12.6 46.5 variants fingergrip 3101.0115 and 3101.0315 11.7 0 -0.15 12 0 -0.1 13 0 -0.3 12.7 0 -0.1 12.7 0 -0.1 mounting holes derating curves for fuseholders admissible power acceptance in watt 1.5 1.0 0.5 0.0 2.5 2.0 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c
fuseholders fpg www.schurter.com/pg0 2 fuses variants holder cap terminal degree of protection material remark order number l slot knob solder ip 40 thermoplastic - 3101.0010 l slot knob solder ip 40 spec. thermoplastic 1 approvals pending 3101.0010.15 l slot knob quick-connect 4.8 x 0.5 mm ip 40 thermoplastic - 3101.0210 l slot knob quick-connect 4.8 x 0.5 mm ip 40 spec. thermoplastic 1 approvals pending 3101.0210.15 l fingergrip solder ip 40 thermoplastic - 3101.0015 l fingergrip solder ip 40 spec. thermoplastic 1 approvals pending 3101.0015.15 l fingergrip quick-connect 4.8 x 0.5 mm ip 40 thermoplastic - 3101.0215 l fingergrip quick-connect 4.8 x 0.5 mm ip 40 spec. thermoplastic 1 approvals pending 3101.0215.15 l slot knob solder ip 67 thermoplastic - 3101.0110 l slot knob solder ip 67 spec. thermoplastic 1 approvals pending 3101.0110.15 l slot knob quick-connect 4.8 x 0.5 mm ip 67 thermoplastic - 3101.0310 l slot knob quick-connect 4.8 x 0.5 mm ip 67 spec. thermoplastic 1 approvals pending 3101.0310.15 l fingergrip solder ip 67 thermoplastic - 3101.0115 l fingergrip solder ip 67 spec. thermoplastic 1 approvals pending 3101.0115.15 l fingergrip quick-connect 4.8 x 0.5 mm ip 67 thermoplastic - 3101.0315 l fingergrip quick-connect 4.8 x 0.5 mm ip 67 spec. thermoplastic 1 approvals pending 3101.0315.15 spec. thermoplastic meet the new requirements of iec 60335-1 ed. 4.0 for appliances in unattended use (clause 30.2.3). this includes the enhanced requirements of glow wire tests acc. to iec 60695-2-11 to -13. white and grey colours available on request packaging unit bulk 186 x 91 x 91 mm (100 pcs.) the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
